Jump to content

Guitare électrique


Recommended Posts

N.code, tu peux jouer avec un Gibson en position manche pour un bon son bien rond en clean ou dans les solos, et un EMG en position Chevalet pour le son bien dur avec la disto:p pourquoi pas :D mais faut pas ce mélanger avec passif / actif , en tout cas c'est ce qu'il me semble.

Un ptite question du FAQ prise sur le site EMG qui dit comment faire pour mélanger actif et passif

bon perso jai rien compri... anglais + thermes techniques faut pas trop en demander ... :ph34r:

Can I mix EMG's with passive pickups?

It is possible to mix EMG's with passive pickups. There are three possible wiring configurations; one is better than the other two.

Use the high impedance (250K-500K) volume and tone controls. The problem is that the high impedance controls act more like a switch to the EMG's. The passive pickups, however, will work fine. If you have a guitar with two pickups and two volume pots, with a three-way switch, there is another alternative. Use the 25K pots for the EMG, and the 250K pots for the passive pickup. This way you can use one or the other with no adverse affects, but with the switch in the middle position the passive pickup will have reduced gain and response.

Use the low-impedance (25K) volume and tone controls provided with the EMG's. The problem here is that the passive pickups will suffer a reduction in gain and loss of high-frequency response.

This is the best alternative. Install an EMG-PA-2 on the passive pickups. There are two benefits to doing this. With the trimpot on the PA-2, you can adjust the gain of the passive pickups to match the EMG's. The PA-2 acts as an impedance matching device so you can use the low-impedance EMG controls (25K) without affecting the tone of the passive pickups. You will also be able to use other EMG accessory circuits such as the SPC, RPC, EXB, EXG, etc. For this application, we recommend ordering the PA-2 without the switch for easy installation on the inside of a guitar.

Link to post
Share on other sites
  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Les mic actif du style EMG81 / 60 / 85 .... faut les acheter par deux.

Enfin ont peut bien evidemment fair un couple de deux actifs diférents , 81/85 , 81/81 ou encore 81/60.

Pour l'alim , c'est bien une pile 9V qui est dans le corps , dans un petit compartiment comme celui de l'éléctronique.

Donc pour les guitares a l'origine aux mic passif, si on pose des actif , je suppose qu'il faut aussi creser le corps .... ?

Link to post
Share on other sites

bah pas forcement, une pile 9v sa prend presque pas de place, si on la mettre au milieu de l'électronique c'est bon, autrement oui on peut creuser un petit compartiment pour.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...