Jump to content
Sign in to follow this  
Lindefan

Guitare électrique

Recommended Posts

N.code, tu peux jouer avec un Gibson en position manche pour un bon son bien rond en clean ou dans les solos, et un EMG en position Chevalet pour le son bien dur avec la disto:p pourquoi pas :D mais faut pas ce mélanger avec passif / actif , en tout cas c'est ce qu'il me semble.

Un ptite question du FAQ prise sur le site EMG qui dit comment faire pour mélanger actif et passif

bon perso jai rien compri... anglais + thermes techniques faut pas trop en demander ... :ph34r:

Can I mix EMG's with passive pickups?

It is possible to mix EMG's with passive pickups. There are three possible wiring configurations; one is better than the other two.

Use the high impedance (250K-500K) volume and tone controls. The problem is that the high impedance controls act more like a switch to the EMG's. The passive pickups, however, will work fine. If you have a guitar with two pickups and two volume pots, with a three-way switch, there is another alternative. Use the 25K pots for the EMG, and the 250K pots for the passive pickup. This way you can use one or the other with no adverse affects, but with the switch in the middle position the passive pickup will have reduced gain and response.

Use the low-impedance (25K) volume and tone controls provided with the EMG's. The problem here is that the passive pickups will suffer a reduction in gain and loss of high-frequency response.

This is the best alternative. Install an EMG-PA-2 on the passive pickups. There are two benefits to doing this. With the trimpot on the PA-2, you can adjust the gain of the passive pickups to match the EMG's. The PA-2 acts as an impedance matching device so you can use the low-impedance EMG controls (25K) without affecting the tone of the passive pickups. You will also be able to use other EMG accessory circuits such as the SPC, RPC, EXB, EXG, etc. For this application, we recommend ordering the PA-2 without the switch for easy installation on the inside of a guitar.

Share this post


Link to post
Share on other sites

Les mic actif du style EMG81 / 60 / 85 .... faut les acheter par deux.

Enfin ont peut bien evidemment fair un couple de deux actifs diférents , 81/85 , 81/81 ou encore 81/60.

Pour l'alim , c'est bien une pile 9V qui est dans le corps , dans un petit compartiment comme celui de l'éléctronique.

Donc pour les guitares a l'origine aux mic passif, si on pose des actif , je suppose qu'il faut aussi creser le corps .... ?

Share this post


Link to post
Share on other sites

bah pas forcement, une pile 9v sa prend presque pas de place, si on la mettre au milieu de l'électronique c'est bon, autrement oui on peut creuser un petit compartiment pour.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...